Altera provides 50-Gbps SFI-5 interface on Stratix II GX FPGAs

Altera Corporation has announced SERDES Framer Interface Level 5 (SFI-5) standard support in its Stratix II GX FPGAs with embedded transceivers, providing a 40- to 50-Gbps interface for high-performance optical communications applications. The SFI-5 specification is a chip-to-chip standard that ensures interoperability between forward-error correction (FEC) and the framer, as well as from industry-leading optical transponder devices. Hardware tested to verify compliance to the SFI-5 standard, Stratix II GX FPGAs feature up to 20 high-speed serial transceiver channels that can operate at data rates between 600 Mbps and 6.375 Gbps, easily satisfying SFI-5 interface requirements.

The SFI-5 Optical Internetworking Forum (OIF) specification was developed to provide an interface between the network processing devices and the optical transponder to enable higher bandwidths. The SFI-5 standard addresses network transport formats including OC-768, STM256, and OTN OTU-3. In addition to supporting the SFI-5 standard, Altera Stratix II GX FPGAs are designed to deliver an extensive set of optical and electrical protocols with low power and industry-leading signal integrity, making them an ideal solution for use in all high-speed designs.

“The SFI-5 standard, as implemented in our Stratix II GX FPGAs, is being adopted rapidly by high-performance optical communications systems,” said David Greenfield, senior director of product marketing, high-end products, at Altera Corporation. “For designers developing next-generation wireline communications applications, our Stratix II GX FPGAs easily exceed the demanding SFI-5 signal integrity and skew requirements with ample margin.”
About Stratix II GX FPGAs

Featuring up to 20 transceiver channels operating from 600 Mbps to 6.375 Gbps, Altera’s Stratix II GX FPGAs offer a high-performance, high-density solution to applications that require multi-gigabit serial I/O. Altera’s transceiver technology provides robust noise immunity and industry-leading jitter performance, while maintaining the lowest power consumption. Stratix II GX devices offer a complete solution supporting many serial protocols, including SerialLite II, XAUI, SONET/SDH, Gigabit Ethernet, Fibre Channel, Serial RapidIO®, PCI Express, SMPTE 292M and SFI-5.

Production-qualified Stratix II GX FPGAs, with support for the SFI-5 protocol, are available now. For additional information about Stratix II GX FPGA SFI-5 protocol support, visit www.altera.com/technology/high_speed/protocols/sfi-5/pro-sfi-5.html. For general information about Altera Stratix II GX FPGAs, visit www.altera.com/stratixgx.

Altera