Xilinx 28nm FPGAs Targets 100-400Gbps Apps

Xilinx Inc. has launched the Virtex-7 HT FPGAs with demonstrated 28Gbps serial transceiver performance, targeted at next-generation 100-400Gbps applications. The 28nm FPGAs enable communication equipment vendors to develop the integrated, high-bandwidth-efficient systems necessary to keep pace with the exploding global demand for more bandwidth in the wired infrastructure and datacenters. The new devices are equipped with the industry's highest-speed and lowest jitter serial transceivers available in an FPGA to support stringent optical and backplane protocols.

"Industry expectations for global IP traffic to approach 64 exabytes per month from today's roughly 15 exabytes per month is fueling the need for higher bandwidth system-on-chip solutions capable of driving high-speed signals with superior signal integrity and low-power efficiency for deployment over fiber optic and other existing infrastructures," said Linley Group Senior Analyst Joseph Byrne. "As the communications industry increases interface speed from 10Gbps to 100Gbps to provide more capacity, requirements for chip-to-optics, chip-to-backplane, and chip-to-chip interfaces become extremely stringent. As such, Xilinx has put a keen focus balancing power, performance, optical jitter constraints and integration in delivering 28Gbps transceivers with its Virtex-7 HT devices."

Built with four to 16 28Gbps transceivers complying with OIF CEI-28G, the Optical Internetworking Forum's Common Electrical I/O specification for 28Gbps, Virtex-7 HT devices are designed to interface to next generation CFP2 and QSFP2 optical modules that will be used in next generation 100-400Gbps system line cards. The devices also have up to 72 13.1Gbps transceivers and can offer up to 2.8Tbps full duplex throughput. This extends the Virtex-7 family's total system performance, with 2x the logic capacity, 1.3x greater memory bandwidth, 2x better static power efficiency, and now 2.7x higher bandwidth over comparable competing devices.

The devices' feature mix allows for a wide range of applications, from low-cost 100G "smart gearbox" chips with 290,000 logic cells to the world's first 400Gbps FPGA with 870,000 logic cells including applications from 100Gbps, 2x100Gbps or 400Gbps interfaces, and efficient connectivity to legacy system side interfaces based on 3Gbps or 6Gbps as well as 10Gbps ASICs and ASSPs. This means Virtex-7 HT FPGAs can be used in applications such as 100Gbps line cards supporting OTU-4 (Optical Transfer Unit) transponders, muxponders or SAR (Service Aggregation Router), lower cost 120Gbps packet processing line cards for high demanding data processing, multiple 100G Ethernet ports bridges, 400Gbps Ethernet line cards, base stations and remote radio heads with 19.6Gbps CPRI (Common Public Radio Interface) requirements, and 100Gbps and 400Gbps test equipment.

Xilinx

RELATED ARTICLES
FPGAs Support 40Gbps and 100Gbps Line Cards

Xilinx Launches Defense-grade FPGAs

Xilinx Expands Capabilities in Asia